Nearly no scrap rate. High utilization of raw material, high yield, high rate of return on investment.
No need secondary heating preform, it can save about 30% power.
Low risk on the mold development and testing with single machine purchase.
No need to afford the equipment and labor force for deflashing and trimming.
Cut the cost for transferring reforms/bottles.
Machine can produce bottles from 5ml to 2500ml, apply materials from PET, PETG, TRITAN/PCTG, to PC etc. Only one machine can meet the needs of all kinds of material.
Upgraded Technology
Plastic injection, blowing and stripping stations act simultaneously to guarantee high efficiency and energy saving operation of the machines.
Automatic production, no need to remove burrs, no need to transport preform, greatly save raw material and labor costs.
Machine with a built-in error detection and alarm system, and display in the manipulation of the screen.
High quality products
Shaping ability: the preform remains warm during the process, which could present a better shaping ability, a sharper angle.
Data Sheet of JASU Injection Stretch Blow Molding Machine (ISBM)
| Item | Unit | Machine Type | ||
| ISB 800AN-3 | ||||
| Injection Part | Screw Diameter | mm | 50 | |
| Screw L/D Ratio | L/D | 20.5:1 | ||
| Screw Speed | r/min | 0-150 | ||
| Theoretical Injection Capacity | cm3 | 481 | ||
| Injection Pressure | MPa | 176 | ||
| Max. Hydraulic Pressure | Kg/cm | 140 | ||
| The Actual Injection Quantity | g(ps) | 452 | ||
| Oz | 16 | |||
| Screw Stroke | mm | 245 | ||
| Clamping Part | Blow Clamping Force | KN | 80 | |
| Clamp Tonnage | KN | 400 | ||
| Wheel Diameter | mm | 800 | ||
| Max. Height | PP, PET, PETG, Tritan, PS, PC | mm | 200 | |
| PC, PETG, Tritan, PS | mm | 220 | ||
| Open Vertical Mode Trip | mm | 570 | ||
| Others | Max. Pump Pressure | MPa | 16 | |
| Servo Motor | Kw | 22 | ||
| Mode Opening/Locking Motor (Double Pump) | Kw | 22 | ||
| Electric Power | Kw | 12.2 | ||
| Tank Volume | L | 420 | ||
| Dimension of Machine | m | 4.2*1.75*3.4 | ||
| Machine Weight | T | 6 | ||
| --Parameters are subject to change without prior notice. --Providing PC, PET, PP, PS, PETG, TRITAN screw barrels according to customers' requirements. | ||||
Pharmaceutical Container Injection Stretch Blow Molding Machine (ISBM ) Jars Cans Injection Stretch Blow Molding Machine (ISBM) Cosmetic Container Injection Stretch Blow Moulding Machine (ISBM) Water Bottle Injection Blowing Molding Machine (ISBM) Light Bulb Cover Injection Blow Molding Machine (IBM) Cup & Jug Injection Blow Molding Machine