Availability: | |
---|---|
Quantity: | |
ISB 1100AN-3
10-5000ml 3300 output Pet Pharmaceutical Medical Health Care Oral Liquid Bottle Jars Automatic making machine/ one-step medicine bottle Injection Stretch Blow moulding machine
JASU single stage fully automatic injection stretch blow molding machine covers about 10 square meters area.
Firstly, raw materials are dried, fed, stored, plasticized and injected into mold to form performs. After opening mold, the preforms quickly reaches to blow molding station and stretch blow molded. Finished bottles are grasped by robot and transferred to conveyor belt. The rear end can be connected to subsequent processes such as leak detection, labeling, filling, and packaging.
Entire production cycle time is about 13 seconds. Simple operation, energy saving and environmental protection, stable quality and high cost performance. This machine can also produce TRITAN\PC\PETG\PS\PP products, just need to change the mold or adjust the process.
JASU One Step Injection Stretch Blow Molding Machine advantages are as follows:
1. The wheel rotation is driven by electrical servo motor, not hydraulic.
2. Full automatic controlling system, easy operating
3. The temperature of material barrel and hot runner is controlled accurately by PIT.
4. More cost is saved than traditional machine.
5. Compact structure; less space needed
6. Injection: Hot runner and temperature control device are standard configuration. Only change mold for making a new product; Stretch Blow:
Hydraulic mold clamping, core insert, stretch blow and bottom molding are standard configuration;Product Release: Equipped with a standard ejector.
MACHINE TECHNICAL PARAMETER
SINGLE STAGE/ONE STEP INJECTION STRETCH BLOW MOLDING MACHINE
ISB 1100AN-3
Injection part | Items | Parameter |
Screw Diameter | 50 | |
Theoretical injection capacity | 481cm3 | |
Injection Pressure | 176Mpa | |
Max.hydraulic Pressure | 140Kg/cm | |
(PS)The actual Injection quantity | 452g(ps)/16oz | |
Screw Stroke | 245mm | |
Clamping part | Blow Clamping Force | 150KN |
Clamp Tonnage | 600KN | |
Wheel Diameter | 1100mm | |
Open vertical mode trip | 570mm | |
Closure height of blow mold | 550mm | |
Closure height of injection mold | 550mm | |
MAX. Height | 220mm | |
blowing part | Maximum blowing pressure | 30Kg |
Exhaust volume required | 1M³ | |
Maximum volume of product that can be blown | 4L | |
Maximum shape of product that can be blown | Diameter 250MM | |
mold part | Injection core material | S136 heat treatment to HRC48-50 |
Injection cavity material | S136 heat treatment to HRC48-50 | |
Hot runner brand | Dongguan Maijia(Runner technology ), cooperate for 12 years | |
blow mold material | S136 heat treatment to HRC48-50 | |
injection mold lifetime | 2 million times | |
blow mold lifetime | 2 million times | |
Others | machine is suitable for kinds of raw material | PET,PC, PETG ,PS ,PCTG ,TRITAN (BPA free) , PMMA,AS |
Servo Motor voltage | 22Kw+22KW | |
MAX.Pump Pressure | 16Mpa | |
Electric power | 12.2Kw | |
Tank Volume | 420L | |
(LXWxH) Dimension of machine | 4.5m*1.95m*3.4m | |
Machine Weight | 9000kg | |
Main Vulnerable parts | Heating ring | |
Pneumatic valve | ||
rubber ring |
CONFIGURATIONS BRAND OF MACHINE ISB 1100AN-3
Configuration name | Brand Name | Origin |
Oil Pump | Eckerle | Germany |
Servo Motor for Shooting Table | Phase | Italy |
Hydraulic Valve | Yuken | Japan/China |
Sealing Parts | SealTech | China |
Pneumatic Parts | AirTAC | Taiwan (China) |
Main Electronic Parts | Schneider | France |
Servo Motor for Turntable | Inovance | China |
Controller (PC) | JASU | Taiwan (China) |
Gear Reducer | SESAME | Taiwan (China) |
Shooting Table | Dandun | China |
We also provide product and mold design,mold manufacture
Real photos of finished products
We provide after sales service all around the world
Poland, Brazil ,Vietnam, Australia, Indonesia, Malaysia, Thailand, Sri Lanka, Kazakhstan, Russia, UAE, Saudi Arabia, Malta, Romania, Italy, India, Syria, Ethiopia, Egypt, Africa, Sudan, Tunisia, Algeria, Kenya, Nigeria, South Africa, Zimbabwe, Mexico, Guatemala, Ecuador, Colombia, Venezuela, Peru....
We provide the best reasonable quotation for each project
Why choose GUAZNGHOU JASU PRECISION MACHINERY CO.,LTD ?
We are THE FIRST to manufacture One Stage Injection Stretch Blow Molding Machine in China on basis of digestion and absorption of the advanced technology from Japan and German.
Manufacturer/Direct Factory with production base takes 24000m2.
Own highly qualified technical staffs (20-30 persons) and R/D center.
Obtained a number of technical patents.
Market network throughout the country , and export to many countries of East Europe, South America, South Africa etc.
Our machine enjoyed high reputation among customers.
Overseas sales increase 33% annually.
Service technicians (holding visa and passport) are on call and able to serve on site and instruct via voice and videos.
Question & Answer.
Q1: Are you a factory or trading company?
A1: We are established in 2003, a actual factory and manufacturer in the line of injection stretch blow molding machine for 18 years.
Q2: Where is your factory located? How can I visit you?
A2: Our factory is located in Panyu District, Guangzhou, Guangdong Province, China, about 48 minutes by high-speed railway from Hong Kong.
5 minutes driving away from Shiqiao subway station.
We can book hotel for you and pick you up from CAN BAIYUN airport or Guangzhou south railway station.
Q3: How about the payment term?
A3: Advancement (subject to our marketing strategy and both parties' discussion) and settle the balance payment prior to delivery.
Q4: What about your main market?
A4: Our machines were sold well in China, also exported and enjoyed a good reputation among customers from Europe, Russia, Southeast Asia, Middle and South America, Africa etc.
Our customers widely spread over Russia, Italy, Poland, Turkey, Netherlands, Sweden, Bulgaria, Brazil, Ecuador, Thailand, India, Myanmar, Malaysia, Vietnam, Cambodia, Egypt, Algeria, South Africa, Ivory Coast, Philippines, Bangladesh......
Q5: How does your factory do regarding quality?
A5: Quality is the most important principle. JASU people always attach great importance to quality controlling from the very beginning to the very end. Our factory has passed ISO ,CE, BV and SGS certification. Patents and many other certificates obtained also tells this.
Q6: What about warranty and do the engineers available to overseas?
A6: One year warranty for free of charges. During this period, if you need any support on installation, adjustment , operation or maintenance, our engineers can go abroad to fix for you.
Q7: Others?
A7: We will request the working voltage and power frequency at the buyer's side when he placing the order.
Each order will be fulfilled as a turn key project of machine.
1. We will check and test the machine and send the video to the customer for reference prior the delivery.
2. Attach/send an operational manual in English/Chinese version with the shipment.
3. To use the machine only need to connect power ,air supply and water supply according to the manual or video instructions if requested.
4. Service technicians are on call to instruct via voice and videos. They all hold visa and passport and be able to serve on site
10-5000ml 3300 output Pet Pharmaceutical Medical Health Care Oral Liquid Bottle Jars Automatic making machine/ one-step medicine bottle Injection Stretch Blow moulding machine
JASU single stage fully automatic injection stretch blow molding machine covers about 10 square meters area.
Firstly, raw materials are dried, fed, stored, plasticized and injected into mold to form performs. After opening mold, the preforms quickly reaches to blow molding station and stretch blow molded. Finished bottles are grasped by robot and transferred to conveyor belt. The rear end can be connected to subsequent processes such as leak detection, labeling, filling, and packaging.
Entire production cycle time is about 13 seconds. Simple operation, energy saving and environmental protection, stable quality and high cost performance. This machine can also produce TRITAN\PC\PETG\PS\PP products, just need to change the mold or adjust the process.
JASU One Step Injection Stretch Blow Molding Machine advantages are as follows:
1. The wheel rotation is driven by electrical servo motor, not hydraulic.
2. Full automatic controlling system, easy operating
3. The temperature of material barrel and hot runner is controlled accurately by PIT.
4. More cost is saved than traditional machine.
5. Compact structure; less space needed
6. Injection: Hot runner and temperature control device are standard configuration. Only change mold for making a new product; Stretch Blow:
Hydraulic mold clamping, core insert, stretch blow and bottom molding are standard configuration;Product Release: Equipped with a standard ejector.
MACHINE TECHNICAL PARAMETER
SINGLE STAGE/ONE STEP INJECTION STRETCH BLOW MOLDING MACHINE
ISB 1100AN-3
Injection part | Items | Parameter |
Screw Diameter | 50 | |
Theoretical injection capacity | 481cm3 | |
Injection Pressure | 176Mpa | |
Max.hydraulic Pressure | 140Kg/cm | |
(PS)The actual Injection quantity | 452g(ps)/16oz | |
Screw Stroke | 245mm | |
Clamping part | Blow Clamping Force | 150KN |
Clamp Tonnage | 600KN | |
Wheel Diameter | 1100mm | |
Open vertical mode trip | 570mm | |
Closure height of blow mold | 550mm | |
Closure height of injection mold | 550mm | |
MAX. Height | 220mm | |
blowing part | Maximum blowing pressure | 30Kg |
Exhaust volume required | 1M³ | |
Maximum volume of product that can be blown | 4L | |
Maximum shape of product that can be blown | Diameter 250MM | |
mold part | Injection core material | S136 heat treatment to HRC48-50 |
Injection cavity material | S136 heat treatment to HRC48-50 | |
Hot runner brand | Dongguan Maijia(Runner technology ), cooperate for 12 years | |
blow mold material | S136 heat treatment to HRC48-50 | |
injection mold lifetime | 2 million times | |
blow mold lifetime | 2 million times | |
Others | machine is suitable for kinds of raw material | PET,PC, PETG ,PS ,PCTG ,TRITAN (BPA free) , PMMA,AS |
Servo Motor voltage | 22Kw+22KW | |
MAX.Pump Pressure | 16Mpa | |
Electric power | 12.2Kw | |
Tank Volume | 420L | |
(LXWxH) Dimension of machine | 4.5m*1.95m*3.4m | |
Machine Weight | 9000kg | |
Main Vulnerable parts | Heating ring | |
Pneumatic valve | ||
rubber ring |
CONFIGURATIONS BRAND OF MACHINE ISB 1100AN-3
Configuration name | Brand Name | Origin |
Oil Pump | Eckerle | Germany |
Servo Motor for Shooting Table | Phase | Italy |
Hydraulic Valve | Yuken | Japan/China |
Sealing Parts | SealTech | China |
Pneumatic Parts | AirTAC | Taiwan (China) |
Main Electronic Parts | Schneider | France |
Servo Motor for Turntable | Inovance | China |
Controller (PC) | JASU | Taiwan (China) |
Gear Reducer | SESAME | Taiwan (China) |
Shooting Table | Dandun | China |
We also provide product and mold design,mold manufacture
Real photos of finished products
We provide after sales service all around the world
Poland, Brazil ,Vietnam, Australia, Indonesia, Malaysia, Thailand, Sri Lanka, Kazakhstan, Russia, UAE, Saudi Arabia, Malta, Romania, Italy, India, Syria, Ethiopia, Egypt, Africa, Sudan, Tunisia, Algeria, Kenya, Nigeria, South Africa, Zimbabwe, Mexico, Guatemala, Ecuador, Colombia, Venezuela, Peru....
We provide the best reasonable quotation for each project
Why choose GUAZNGHOU JASU PRECISION MACHINERY CO.,LTD ?
We are THE FIRST to manufacture One Stage Injection Stretch Blow Molding Machine in China on basis of digestion and absorption of the advanced technology from Japan and German.
Manufacturer/Direct Factory with production base takes 24000m2.
Own highly qualified technical staffs (20-30 persons) and R/D center.
Obtained a number of technical patents.
Market network throughout the country , and export to many countries of East Europe, South America, South Africa etc.
Our machine enjoyed high reputation among customers.
Overseas sales increase 33% annually.
Service technicians (holding visa and passport) are on call and able to serve on site and instruct via voice and videos.
Question & Answer.
Q1: Are you a factory or trading company?
A1: We are established in 2003, a actual factory and manufacturer in the line of injection stretch blow molding machine for 18 years.
Q2: Where is your factory located? How can I visit you?
A2: Our factory is located in Panyu District, Guangzhou, Guangdong Province, China, about 48 minutes by high-speed railway from Hong Kong.
5 minutes driving away from Shiqiao subway station.
We can book hotel for you and pick you up from CAN BAIYUN airport or Guangzhou south railway station.
Q3: How about the payment term?
A3: Advancement (subject to our marketing strategy and both parties' discussion) and settle the balance payment prior to delivery.
Q4: What about your main market?
A4: Our machines were sold well in China, also exported and enjoyed a good reputation among customers from Europe, Russia, Southeast Asia, Middle and South America, Africa etc.
Our customers widely spread over Russia, Italy, Poland, Turkey, Netherlands, Sweden, Bulgaria, Brazil, Ecuador, Thailand, India, Myanmar, Malaysia, Vietnam, Cambodia, Egypt, Algeria, South Africa, Ivory Coast, Philippines, Bangladesh......
Q5: How does your factory do regarding quality?
A5: Quality is the most important principle. JASU people always attach great importance to quality controlling from the very beginning to the very end. Our factory has passed ISO ,CE, BV and SGS certification. Patents and many other certificates obtained also tells this.
Q6: What about warranty and do the engineers available to overseas?
A6: One year warranty for free of charges. During this period, if you need any support on installation, adjustment , operation or maintenance, our engineers can go abroad to fix for you.
Q7: Others?
A7: We will request the working voltage and power frequency at the buyer's side when he placing the order.
Each order will be fulfilled as a turn key project of machine.
1. We will check and test the machine and send the video to the customer for reference prior the delivery.
2. Attach/send an operational manual in English/Chinese version with the shipment.
3. To use the machine only need to connect power ,air supply and water supply according to the manual or video instructions if requested.
4. Service technicians are on call to instruct via voice and videos. They all hold visa and passport and be able to serve on site
Q1: All of your products are made by yourself or compacted via purchasing from others?
A1: JASU have independent technical team who focus on making machines and moulds, all the products are made by our technical team.
Q2: What is the ability of your factory?
A2: About injection stretch blow molding machine, we can product more than 30 sets machine per month
Q3: Do you have any technical supports about your products?
A3: We have had long term collaboration with German, and we have a lot of cooperation with a lot of advanced manufacture company on the world.
Q4: Do you have any other service about your products?
A4: We have a lot of experience on making complete "Turn-Key" projects and specifications for our clients. Also we have a fixed service system
Q1: All of your products are made by yourself or compacted via purchasing from others?
A1: JASU have independent technical team who focus on making machines and moulds, all the products are made by our technical team.
Q2: What is the ability of your factory?
A2: About injection stretch blow molding machine, we can product more than 30 sets machine per month
Q3: Do you have any technical supports about your products?
A3: We have had long term collaboration with German, and we have a lot of cooperation with a lot of advanced manufacture company on the world.
Q4: Do you have any other service about your products?
A4: We have a lot of experience on making complete "Turn-Key" projects and specifications for our clients. Also we have a fixed service system
Pre-Sales Service
* Inquiry and consulting support.
* Free product design.
* Visit our Factory.
Warranty
* The machine and mold guarantee for one year with repair/ free replacement of defective parts.
* Spare parts of machine components, mold components and tools are shipped along with the machine.
After-Sales Service
* JASU wants to make sure you are getting the very best out of the machine and mold. After delivery, we will send our engineer to your plant to train your staff how to use the machine well, until we get approval by the customer.
* Remote assistance to help you solve problems in case of machine system failure.
Pre-Sales Service
* Inquiry and consulting support.
* Free product design.
* Visit our Factory.
Warranty
* The machine and mold guarantee for one year with repair/ free replacement of defective parts.
* Spare parts of machine components, mold components and tools are shipped along with the machine.
After-Sales Service
* JASU wants to make sure you are getting the very best out of the machine and mold. After delivery, we will send our engineer to your plant to train your staff how to use the machine well, until we get approval by the customer.
* Remote assistance to help you solve problems in case of machine system failure.